Measured today...how low am I?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jimmyp19

Full Access Member
Joined
Feb 12, 2011
Posts
270
Reaction score
5
Location
NH
Drivers Front

002ee1bf-a933-4a83-9373-e3cb9016c77d_zps8f72eb86.jpg


Pass Front

2edf392d-418c-4492-9c57-bde64704d7dd_zps8cf05862.jpg

Pass Rear

45422d0a-fa50-4e75-a00a-bd3ed5814db7_zps2710007d.jpg

Drivers Rear

3a5ed9fa-916a-4abc-93c3-254d8a7be366_zps5ea641d6.jpg

All Ground to Fender lip on

305 / 35R 24

I lightened the pics up because with the black it was hard to see the fender lip.

Thanks

jimbo
 
Last edited:

NathanJax

Vacation Nathan
Staff member
Administrator
Supporting Member
Joined
May 9, 2009
Posts
49,135
Reaction score
943,577,172
Location
Jax, Fl
Probably right around a 3/5. I'm at 32" in front and 33" in rear and I'm 3.5" lower than I was stock in front and about 5.5" lower than I was stock in the rear...
 

07Burb

GM fan for life
Staff member
Administrator
Supporting Member
Joined
Jan 3, 2011
Posts
50,452
Reaction score
17,560
Technically, the fender lips aren't the level place to measure, the rockers are.

when measuring how low (or high) a vehicle is from stock you always measure at the fender lips as the measurement is commonly slightly different at each wheel :waytogo:
 
OP
OP
J

Jimmyp19

Full Access Member
Joined
Feb 12, 2011
Posts
270
Reaction score
5
Location
NH
Surprised I'm not lower in the front.

Tony?

I have spindles and belltech 2 in struts all the way down no spacers....I was thinking 4 plus
 

NORCAL SS

SUV SUSPENSION GURU
Supporting Vendor
Joined
Jun 9, 2009
Posts
8,744
Reaction score
608
My escalade was 38.75 rear stock and 36.75 front stock. gm used different springs on these trucks so some do sit lower than others.

on 305 35 24 im at 33 1/4 in front and that is over 3.5 inches lower then original height on mine. In rear im at 33.5 which is 5.25 lower than stock

and another reason when i mod the 07 up struts i always go lower on the pass side because they sit up higher from 1/4 to 1/2 inch
 
Last edited:

Forum statistics

Threads
133,338
Posts
1,883,881
Members
98,425
Latest member
Tslick23

Latest posts

Top