Only if you are doing a full dyno tune (aka a load bearing dyno with part throttle mapping) and with a competent tuner. A lot of folks will go to a dyno for a tune and only get a few WOT pulls which you can not get a good tune off of.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Only if you are doing a full dyno tune (aka a load bearing dyno with part throttle mapping) and with a competent tuner. A lot of folks will go to a dyno for a tune and only get a few WOT pulls which you can not get a good tune off of.
Whoever you go with, just make sure they have experience tuning a F/I setup, as they are completely different animals from a N/A setup.