My latest Adventure, update 7/11/21

[bigdog9191999]

 

[bigdog9191999]

apparently the reverse lights should be red not clear, and the overspray, oh the overspray.

 

[bigdog9191999]

the shots of the quarter are all the same light, just movement and different color













some of that factory fresh gold!!

 

[bigdog9191999]

more overspray and goodness.

 

[bigdog9191999]

but look at that performance exhaust!!!!


but i do have a 78mm tb that can be put on

 

[bigdog9191999]

and on a more boring note, i got the snow tires off the tahoe for some crappy ones i had on last summer with my original avalanche wheels.




supposed to be a p71 alt if i can get it on the car.






possible tires for the car later??? have to see how it goes!









and the fuzz ball, cause this is only the second time he has actually laid on our laps..

 

[bigdog9191999]

the car overall isnt too bad and does run but needs a few things, cowl put back together, water pump ( with it, just needs installed) t-stat, pipes hooked back to the manifolds i think ( haven't been under it yet to verify)

not sure what the end goal is for it, but for a $300 beater i am pretty open!.

rust is minimal, tires actually has two good pair just on wheels for a different year so they sit under the car pretty far. if i keep it this will be one thing i will be addressing wither with the spacers i have on the hoopty or different wheels.




and for funzies, here is an air chuck creation i ended up making so we could use his compressor and my chuck to air some tires up easier.






and coney dogs for lunch!

 

[bigdog9191999]

alright, so with overtime there hasnt been alot of good time to dive into the larger project stuff, but with nicer weather starting to stick around i will be pushing harder to get this bike done. so here we go!


remember we went from this.. then digressed.

 

[bigdog9191999]

with an alt like a car is why you see so many wings with so many lights. no tiny stator here!!







stem ready for new bearings.










new and old.. the oem design not really the best. the new ones will hold up much better for longer.









and the fuzz is just too cute

 

[bigdog9191999]

couple more that i missed.















and some new dice as we are dabbling in some D&D stuff at least for the summer. ( one of 5 sets of die, and one of a 4 pack of mats. )