My Yukon XL on 28's

[LILC509]

It was @ $300 for the standard length vehicles. I'd imagine it will be just slightly more for your vehicle.

Keep in mind that the Esky has holes in its doors where "locating tabs" on the back of the molding sit. So, if you get the Esky molding, you'll just need to clip the plastic tabs off the back of them. Very easily done. Just a heads-up.

So my friend just got an 07 ESV and he wants to demold it. Are there any screws holding those "locating tabs"? Are there holes in the ESV doors that will be seen when door trim removed? He wants to do the blacked out look. I'll get his mirrors also while i'm at it.

 

[edgaranah1]

No screws for the moldings just an adhesive.


Sent from my iPad using Tapatalk

 

[steven13608]

Careful about the logo on tail gate about the license plate area. The bow tie on my tahoe was held on by adheisive but it also had to locator pins(holes).

 

[NathanJax]

Careful about the logo on tail gate about the license plate area. The bow tie on my tahoe was held on by adheisive but it also had to locator pins(holes).

Yukons > Tahoes


We don't have those holes...

 

[LILC509]

Yukons > Tahoes


We don't have those holes...

Thanks for the info, good to know that Tahoe has them but not the Yukons.

The locator tab doesn't go into the door of the escalade?