Need a transfer case

[DallasTahoe]

Tired of dealing with transfer case issues, is there somewhere I can get a good rebuilt unit or maybe a shop here in the Dallas Ft Worth area that is good with np246 tc’s? Please help


Sent from my iPhone using Tapatalk

 

[Doubeleive]

these guys are good, there are more out there as well that other's have dealt with
https://www.powertrainproducts.net/...PB7odWEIHiLulHK4L1hf3XolEUtegfjBoCA4gQAvD_BwE

 

[DallasTahoe]

these guys are good, there are more out there as well that other's have dealt with
https://www.powertrainproducts.net/...PB7odWEIHiLulHK4L1hf3XolEUtegfjBoCA4gQAvD_BwE

So how was your experience with them? How did you do the core exchange?


Sent from my iPhone using Tapatalk

 

[Doubeleive]

So how was your experience with them? How did you do the core exchange?


Sent from my iPhone using Tapatalk

they were great, when they shipped the transfer case it came in a plastic bin carrier with straps, you just put the core (drain any old fluid out first) back in the same case and then call them and do a call tag for it to be picked up. there warranty includes parts and labor nation wide.

 

[DallasTahoe]

they were great, when they shipped the transfer case it came in a plastic bin carrier with straps, you just put the core (drain any old fluid out first) back in the same case and then call them and do a call tag for it to be picked up. there warranty includes parts and labor nation wide.

Cool thanks for the info!


Sent from my iPhone using Tapatalk

 

[DallasTahoe]

So I’m guessing this is not good, I was about to pull the shift encoder motor and try a different one just to try and save $850 for a new transfer case, and I was moving the front driveshaft and noticed about 3/16in of vertical or horizontal movement from the output shaft, I have a video but couldn’t upload it.


Sent from my iPhone using Tapatalk

 

[Doubeleive]

So I’m guessing this is not good, I was about to pull the shift encoder motor and try a different one just to try and save $850 for a new transfer case, and I was moving the front driveshaft and noticed about 3/16in of vertical or horizontal movement from the output shaft, I have a video but couldn’t upload it.


Sent from my iPhone using Tapatalk

video's you can upload to youtube and then link it here

 

[DallasTahoe]

Got my transfer case rebuilt, needed clutches and chain, but also had them drop in new steel cage bearings a new pump, seals, and a new heavy duty aluminum backhalf, and new speed sensors, all total $500 ($200 of that was for the new backhalf) their completely remanufactured units are about $950. Considering everything I had them do it’s a new transfer case so guess I curved their system a bit


Sent from my iPhone using Tapatalk

 

[fastpat]

video's you can upload to youtube and then link it here

Do you have a '94-99 OBS truck, sir?

 

[Doubeleive]

Do you have a '94-99 OBS truck, sir?

I don't anymore, I totaled mine on a over pass in the rain, played pin ball against the guard rail's at about 65 mph, then I bought a 2000 nbs Yukon xl and drove that for almost 300k (sold), and got the 03 Silverado some where in between that and now I have the nnbs also, I also bought my ex wife a 04 nbs suburban, and before all that I had a 96 4 runner that I rolled/totaled in the rain also, I play rough, lol I had a couple 79/80 trans am's during and before that, used to have 3 or 4 vehicles floating around all the time for whatever reason something to work on play with or whatever. I have the itch...to get something else just haven't scratched yet.