Need help figuring out what wheel size I need

[97WhiteYukon]

Hi guys, Im trying to figure out what wheel size I should get. I know I want 16's and probably 8 inch wide wheel but Im not sure about what back spacing and offsets and what will work. I really like the black rock Yuma 908B wheels. I found a thread where someone said 5inch rear spacing and a 13mm offset is closer to stock. What I would like is the wheels and tires to be close to flush with the body, I don't have fender flares and I don't want them to stick too far out past the fender. Anyways I hope I made sense here if someone would point me in the right direction that would be great, heres the list of sizes the black rock wheels come in, would any of those fit and look how I want? thanks!

http://www.blackrockwheels.com/products16-16/BlackRockYumaSeries908B

 

[SunlitComet]

you are 4wd so you have a six lug axle so 6x5.5 lug pattern 16x8 wheel with 4.5 bs and zero offset will be just fine.

 

[97WhiteYukon]

Thanks for the input, what do you think about how far they would be sticking out? I've been scouring the Internet for pics with them on our body style but can't come up with any.

 

[SunlitComet]

17x8, 0mm offset, 4.5 in bs currently with lt265/70/17's eventually will go to lt285/70/17/ when re-gearing parts are in hand. oem stock as ordered from factory was p245/75/16.



---------- Post added at 10:10 PM ---------- Previous post was at 10:09 PM ----------

truck was loaded at the time.

 

[97WhiteYukon]

Hey thanks that really helps me a lot

 

[97WhiteYukon]

Hate to revive an old thread, but how about the center bore? if these wheels only come in a 3.075 or a 4.25 center bore, which one would fit my truck? if I get the one that's bigger than stock will I need some sort of spacer? I was just about to order them and then I realized there were two different center bores.

 

[SunlitComet]

vehicle hub is smaller of the two numbers on a 6-lug 4wd. the wheels i got mine the only had 4.25 so i got these for my wheel to hub centric rings. www.amazon.com/gp/product/B002801UHM/. many sizes available tho.

 

[97WhiteYukon]

Those are the right ones for 4.25? Ill probably just get those then, the smaller size is just slightly smaller than stock if I'm not mistaken. Thanks a lot for your help, I think I can finally order everything I need.

 

[SunlitComet]

yep get those. when you get them on lets have a look see.

 

[Green monster]

So with the fender flares, I could get away with 4" backspacing? Only thing I'm worried about is I'm running 285/75/16's and only lifted 2 inches.