New guy in OKC

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MSborn882007

Member
Joined
Dec 12, 2012
Posts
54
Reaction score
0
Hey guys, new member here. I just bout my 92 Yukon a few hours ago. Looking for some ideas for it. It's gonna be pretty much a weekend warrior but still need to keep good gas mileage for when I make the 8hr drive back. Mainly looking for performance mods, eventually a small lift, and dress up the exterior some. Thanks
 

Gzes

the drifting 2dr
Joined
Aug 9, 2011
Posts
5,433
Reaction score
51
Location
Wichita tx
Badass dude post up some pictures. I have a 94 but mines a k5

---------- Post added at 10:38 PM ---------- Previous post was at 10:35 PM ----------

Small lift = 3in body lift. I have it in my 2dr and it makes a very nice difference. Perfomance well our tbi cant do too much id suggest conveting the air cleaner to 1 stud and getting an eddlebrock 3 or 4 in like mine and maybe a mild cam but you need a tbi chip... If you need any info on tbi let me or adam aka atomichoe know since we both got tbis but his is wippled

---------- Post added at 10:51 PM ---------- Previous post was at 10:38 PM ----------

Ur in okc? Nice thats 2 hrs from me. Sometimes i go up there maybe youve seen my 2dr around. Be carful with the thieves up there they broke into my uncles house and cleaned the house out completely food and all even my aunts socks and underwear lol.... If you wanna do the body lift i can probably help you put with it. I did mine and was fairly easy just needed to extend shift linkage but was very easy to do
 
OP
OP
M

MSborn882007

Member
Joined
Dec 12, 2012
Posts
54
Reaction score
0
Thanks man. I'm trying to figure how to post pics but no luck yet.i was thinking bout the body lift since I'm only gonna do mild trail riding an would like to eventually put some slightly bigger tires on it.im not crazy bout the tbi but luckily this one runs pretty good. I'm just lookin to do bolt on or DIY mods for now an then eventually do a mild cam an chip. I live on base so luckily I only have to worry when I go off base which ain't much lol. Are there any decent trails between okc an where you're at?
 

Gzes

the drifting 2dr
Joined
Aug 9, 2011
Posts
5,433
Reaction score
51
Location
Wichita tx
Only thing we have is on the red river there is a road that takes you down. Ive never been in there but don yukon used to when he was at sheppard but thays it... No real trails anywhere in ok or tx. If you head out to nm around the roswell area theres deser and sand dunes but yea tx and ok are flat

---------- Post added at 11:45 PM ---------- Previous post was at 11:43 PM ----------

Mine with the body lift IMAG0486_zps73f7adad.jpg
 

Gzes

the drifting 2dr
Joined
Aug 9, 2011
Posts
5,433
Reaction score
51
Location
Wichita tx
Got it on ebay for under $200 and its a performance acessories kit

---------- Post added at 08:24 AM ---------- Previous post was at 08:13 AM ----------

Im also gonna put 2in blocks and level with a torsion crank and thats $50 for the blocks and u bolts and then the crank amd then the alighnment
 
OP
OP
M

MSborn882007

Member
Joined
Dec 12, 2012
Posts
54
Reaction score
0
Ok thanks. If I get a body lift I'll be sure to hit you up. With this being my first 4wd,don't really know much bout installing these lift components an don't wanna mess anything up lol
 

Gzes

the drifting 2dr
Joined
Aug 9, 2011
Posts
5,433
Reaction score
51
Location
Wichita tx
Yea lol. If you want i can do it for you over here but we would have to prep the bolts first because one of mine was rotted from being from the north and snapped and took me a welder to get it out

---------- Post added at 09:11 AM ---------- Previous post was at 09:07 AM ----------

I usually charge people $400 for the install but for tyf i can do $325 for the install if you want it
 
OP
OP
M

MSborn882007

Member
Joined
Dec 12, 2012
Posts
54
Reaction score
0
Ok ill be sure to let you know. Luckily this truck is from California so it doesn't have much rust
 

Forum statistics

Threads
132,883
Posts
1,876,063
Members
97,800
Latest member
WhitsEnd
Top