Evening everyone. Been a Toyota family for the past 4 vehicles and decided to venture out and got a 2020 Tahoe LS a few weeks back. Found the page through a Google search of how to install OEM fog lights. Hope to start on that project shortly.
New guy with a new ride in NC
- Thread starter JAlston
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
wjburken
Supporting Member
Welcome to the forum from Iowa.
Welcome to the forum from Oregon and a nice looking rig. Post more pics please.
We recommend that you put all your rig(s) info in your signature so we all don’t have to guess at year, make, model, engine size, trans, rear axle locker…….etc. While you may have posted pertinent info in your first post, you may forget to do it again and the info is needed by us anyway. Makes it way easier on all members that attempt to help, to have that info right up front. It is also recommended that you take a pic of your RPO codes, on the inside cover of the glove box, and post that image in your signature. All this info will greatly help those that will try to help with a problem.
If there is any other info, like upgrades, mods or recent mechanical/maintenance work done, that would be helpful in any post as well. Too many times a question is asked by the poster and after about 10 responses we find out that the poster has done recent work to attempt to fix the problem or work that was done that SEEMS not related to the problem.
We recommend that you put all your rig(s) info in your signature so we all don’t have to guess at year, make, model, engine size, trans, rear axle locker…….etc. While you may have posted pertinent info in your first post, you may forget to do it again and the info is needed by us anyway. Makes it way easier on all members that attempt to help, to have that info right up front. It is also recommended that you take a pic of your RPO codes, on the inside cover of the glove box, and post that image in your signature. All this info will greatly help those that will try to help with a problem.
If there is any other info, like upgrades, mods or recent mechanical/maintenance work done, that would be helpful in any post as well. Too many times a question is asked by the poster and after about 10 responses we find out that the poster has done recent work to attempt to fix the problem or work that was done that SEEMS not related to the problem.
Tonyrodz
Resident Resident
Welcome from NJ.
BlackedOutHoe
Low & Slow
Welcome from Lexington, SC.
Joseph Garcia
Supporting Member
- Joined
- Aug 2, 2018
- Posts
- 7,484
- Reaction score
- 10,214
Welcome to the Forum from NH.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Welcome from Oregon. Nice looking rig!
- Joined
- Dec 8, 2016
- Posts
- 3,876
- Reaction score
- 4,880
Welcome from Miami Beach James.
Nice Tahoe! In my neck of the woods there are hardly any 2020 Tahoe's left on the lot. Glad you got years already.
Nice Tahoe! In my neck of the woods there are hardly any 2020 Tahoe's left on the lot. Glad you got years already.
Thanks for the warm reception everyone. I'll get some more stats posted on it soon. I'm not much of a gearhead but want to expand my knowledge base and noticed the vast amount of info in this forum.
First thing I want to do is learn I have less ground clearance on the front than my 4Runner has and my Taco had. I caught the curb at the auto parts store and ripped out a screw hole on the air dam/diffuser. After that I want to tackle is installing OEM fogs since it didn't come with any equipped (stock was getting low...shocker)
First thing I want to do is learn I have less ground clearance on the front than my 4Runner has and my Taco had. I caught the curb at the auto parts store and ripped out a screw hole on the air dam/diffuser. After that I want to tackle is installing OEM fogs since it didn't come with any equipped (stock was getting low...shocker)
