Trey Hardy
8” fabtech icon coilovers uniballs 24x14on35/15.50
So I ain’t been on in awhile but here’s some updates on the Silverado and Tahoe.
I sold the bilstein shocks I had brings I found a super good deal on a new set of icon coil overs and if I could get the lift I wanted without stacking leveling kits with better angles that’s what i wanted.
So I took the rough country UCA off my truck because there maxed out with the 7.5” lift they are really designed for 2.5-5” lift anything more than that it makes it hard to align. So I am getting cognitos for the truck using the RC on the Tahoe just because I already got em with a diff drop icons set on 3” with a 1” leveling kit so it should sit pretty high vs stock but still have good angles on the front suspension we shall see.
update on the truck I got the front end replaced with kryptonite products put the 2500 grille on waiting for the bumper now.
I put some 24x14 Arkons and 37 toyos
And I got the motor apart I’ve installed a melling oil pump ls6 valve springs a Brian tooley NSR cam and a ported throttle body once I get it back together I’ll be starting the parts list so I can do the same to the Tahoe and knock that dod crap out I’ve got it tuned out for now but want to do a good clean on the engine port and polish heads and freshen it up it needs it with almost 300k miles on it! If anyone has any questions or comments comment on the post please no negative comments
I sold the bilstein shocks I had brings I found a super good deal on a new set of icon coil overs and if I could get the lift I wanted without stacking leveling kits with better angles that’s what i wanted.
So I took the rough country UCA off my truck because there maxed out with the 7.5” lift they are really designed for 2.5-5” lift anything more than that it makes it hard to align. So I am getting cognitos for the truck using the RC on the Tahoe just because I already got em with a diff drop icons set on 3” with a 1” leveling kit so it should sit pretty high vs stock but still have good angles on the front suspension we shall see.
update on the truck I got the front end replaced with kryptonite products put the 2500 grille on waiting for the bumper now.
I put some 24x14 Arkons and 37 toyos
And I got the motor apart I’ve installed a melling oil pump ls6 valve springs a Brian tooley NSR cam and a ported throttle body once I get it back together I’ll be starting the parts list so I can do the same to the Tahoe and knock that dod crap out I’ve got it tuned out for now but want to do a good clean on the engine port and polish heads and freshen it up it needs it with almost 300k miles on it! If anyone has any questions or comments comment on the post please no negative comments
