NORCAL SS 3/5-6 ON Deanli with 24s
- Thread starter NORCAL SS
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
do not use keys. more than 1 inch they start to ride worse and worse. at 2 inches camber off and wont align and lower than that worse it gets. the a arms is what lowers the truck 3 inches reindexs keys and ride stays nice
ohitstruee
Member
here's mine on Tony's kit with 26'sSent from my iPhone using Tapatalk
mason313
Full Access Member
- Joined
- Jul 9, 2010
- Posts
- 249
- Reaction score
- 53
here's mine on Tony's kit with 26's
Sent from my iPhone using Tapatalk
man you make me want 26s
Fernando navarro
Member
Real nice how low are you ?here's mine on Tony's kit with 26's
Sent from my iPhone using Tapatalk
ohitstruee
Member
Trashcan
TYF Newbie
- Joined
- Oct 10, 2018
- Posts
- 5
- Reaction score
- 1
How’s the ride quality on that? Looks good. I wanted to go 2/4. But now I’m thinking of doing the 3-5/6. Is it still AWD? And are you still using factory air ride? I don’t want any error messages on my dash.
OP
OP
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
My set up 3/5-6 rides good. Awd is no issue but my set up bypasses autoride and no message on dash
DDenali
Full Access Member
Looking at that 3/5-6 drop has me second guessing my visions since thatll be a little lower than I want. So I'll probably go with a 2/3-4 drop that should be sufficient enough to eliminate the hidious gap. Tony any ideas for the my setup. I want the best solution.
Sent from my SM-N950U using Tapatalk
Sent from my SM-N950U using Tapatalk
Not a Denali... I have a 3/4 drop currently. Sometime soon I will end up getting 6” springs. It’s just not low enough! Also stay away from drop keys! The ride using keys is why I bought Tony’s kit.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
