zyka1
TYF Newbie
- Joined
- Sep 27, 2010
- Posts
- 23
- Reaction score
- 0
I got a NP246 t case and have few questions about assembly.
Whis way does the inner clutch pressure plate sit on the inner clutch hub A or B:
With the anti clunk spring which way does it sit, is it this way :
With the clutch pack do the frictions need to be presoaked, and does the stack start with a steel and end with a friction, like in the picture:
If there is any techno out there with experience I would really appreciate your help.
thanks
Whis way does the inner clutch pressure plate sit on the inner clutch hub A or B:
With the anti clunk spring which way does it sit, is it this way :
With the clutch pack do the frictions need to be presoaked, and does the stack start with a steel and end with a friction, like in the picture:
If there is any techno out there with experience I would really appreciate your help.
thanks
