ktmhans
Full Access Member
Cleaning out the shop. I had a 1998 tahoe vortec 5.7 so that is what most of this was used on.
Cat engineering stainless roller rockers. the were used for a short time. Nothing was wrong when removed. I have half 1.5 ratio and half 1.6 ratio. They are for the vortec heads and are self aligning. I havr the locks for these also $55 TYD in lower 48
Comp cams roller tip only rockers. Part #1418_16 self aligning as well. Used can remember how long , maybe 15K or so. I have the nuts but you may want to buy new ones. $55 TYD in lower 48
2 factory rear axle bump stops in good shape with the hardware. I took them off for airbags. $15 TYD " "
2 electric fans
1 single fan that has a 2 lead plug, I bought to go on tahoe and never got around to it. $40 TYD " "
1 double fan that has a 4 lead plug. $60 TYD " "
Fans work
I have taken pictures so I can email on request and will work on getting em up
thanks hans
Cat engineering stainless roller rockers. the were used for a short time. Nothing was wrong when removed. I have half 1.5 ratio and half 1.6 ratio. They are for the vortec heads and are self aligning. I havr the locks for these also $55 TYD in lower 48
Comp cams roller tip only rockers. Part #1418_16 self aligning as well. Used can remember how long , maybe 15K or so. I have the nuts but you may want to buy new ones. $55 TYD in lower 48
2 factory rear axle bump stops in good shape with the hardware. I took them off for airbags. $15 TYD " "
2 electric fans
1 single fan that has a 2 lead plug, I bought to go on tahoe and never got around to it. $40 TYD " "
1 double fan that has a 4 lead plug. $60 TYD " "
Fans work
I have taken pictures so I can email on request and will work on getting em up
thanks hans