Beezaroh
Member
- Joined
- May 14, 2014
- Posts
- 50
- Reaction score
- 72
Sent from my iPhone using Tapatalk
OPTIC DRL LED Projector and tail lights opinions
- Thread starter Fink117
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sent from my iPhone using Tapatalk
OP
OP
Fink117
Full Access Member
- Joined
- Jul 20, 2013
- Posts
- 88
- Reaction score
- 6
Wow that looks fantastic! What bulbs are you running in the projector housing? And are those the same as the link I put up or did you get a different manufacturer?
Sent from my iPhone using Tapatalk
Last edited:
OP
OP
Fink117
Full Access Member
- Joined
- Jul 20, 2013
- Posts
- 88
- Reaction score
- 6
That with an LED bulb could look amazing. The cut off is much better than I expected.
Beezaroh
Member
- Joined
- May 14, 2014
- Posts
- 50
- Reaction score
- 72
Im using the bulb it came with. Ill be switching to led soon but its not a direct oem Fit, so i have to figure that out. Bought them from ebay tho. Dt moto i believe
Sent from my iPhone using Tapatalk
90PROFX
Member
- Joined
- Apr 4, 2016
- Posts
- 35
- Reaction score
- 14
I kinda have to agree, the pic confirms my worst fear is laid to rest on the cut off. I'm in for a pair of these.
I'd still like to hear some feedback on swapping out for LED lights as we all know the Tahoe has little to no room on the back side for LED's sporting fans or big heat sinks, etc, etc. Kinda relying on those who have done the mod for guidance as I can't afford to have mine down for very long. I'm trying to get to a point of gathering all my parts (headlight housings, LED bulbs Hi & Low, Fog LED's) so I can pull it apart flip it and back together again.
Thanks to all that provide and share this info.
I'd still like to hear some feedback on swapping out for LED lights as we all know the Tahoe has little to no room on the back side for LED's sporting fans or big heat sinks, etc, etc. Kinda relying on those who have done the mod for guidance as I can't afford to have mine down for very long. I'm trying to get to a point of gathering all my parts (headlight housings, LED bulbs Hi & Low, Fog LED's) so I can pull it apart flip it and back together again.
Thanks to all that provide and share this info.
Last edited:
DWebPro
Full Access Member
watching this thread.
What LED bulb kit did you use? I'd rather not have to rewrite the whole headlight just to use a LED or HID.
DWebPro
Full Access Member
If it helps, the link below are the LED lights I have installed now. On the passenger side its a little tight but I got them to work with no modifications to anything.
https://www.amazon.com/dp/B01KAIY7IW/ref=cm_sw_r_sms_apip_swPRRB5lhgiHR
https://www.amazon.com/dp/B01KAIY7IW/ref=cm_sw_r_sms_apip_swPRRB5lhgiHR
So these headlights come with a projector housing?
What would the benefits be of running LED for the headlight over an HID bulb?
Basically, is this the answer that a lot of us have been looking for other than going with a complete retro fit?
Sorry, I'm a newb. But yes, I did read through the sticky about anzo and the other 10page one.
What would the benefits be of running LED for the headlight over an HID bulb?
Basically, is this the answer that a lot of us have been looking for other than going with a complete retro fit?
Sorry, I'm a newb. But yes, I did read through the sticky about anzo and the other 10page one.
K2 Kaiju
Full Access Member
My low beam bulbs lasted 4 months on these, and its hard to get replacements to work correctly. Projectors are really picky with placement. Had to put my oems back on, and with ss ultra, they are actually much brighter. Still miss the look, and plan on replacing projectors later...
Sent from my SM-T350 using Tapatalk
Sent from my SM-T350 using Tapatalk
