P0340 DTC found

[Blask_3]

So I replaced the camshaft position sensor think that this was the issues with the code. I reset it and it came back on and is reading as a problem with the circuit. Anyone ever have this issue and have any idea how I can fix it?

 

[kcb37]

You might try searching for a cam sensor relearn.
Believe these do have a crank relearn just not sure about the cam sensor.
But here is a basic rundown of things to check for you.
http://www.obd-codes.com/p0340

 

[SunlitComet]

There is no cam relearn. the code means it is not receiving a signal from the cam sensor. ensure it is fully plugged in and no wires are damaged.