blizz
Full Access Member
Parking brake light stays on after releasing the parking brake. Any ideas?
Last edited:
Parking brake light on dash
- Thread starter blizz
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Tonyrodz
Resident Resident
Have you checked the fluid level? Did it release fully?
Pull the release and use your toe to pull up on the pedal and see if the light goes out. Last one I did the front parking brake cable was binding and wouldn't release. You can see the switch on the pedal assembly under the dash.
Your 'break' is broke, and your 'brake' might be, too. 
OP
OP
blizz
Full Access Member
lol oops. Too early in the morning I guess.Your 'break' is broke, and your 'brake' might be, too.
look up under the dash where the mechanism is, there is a little copper color metal tab contact switch, I can't recall if it contacts when the brake is applied or releases when the brake is applied it's one or the other.
if it is the fluid level sensor unplugging it would make the light go out.
Last edited:
