Performance spark plug wires

[CHOO CHOO]

So I read the sticky above and i get stay away from msd. Soooo, what do I get? I apparently have some bad wires and want to replace them with some better ones. Recommendations anyone? Its a 5.3L and I'm using E3 spark plugs.

 

[akbrener]

AC delco all the way

 

[Fast55]

Magnecor 80283. About $75.00 if you shop around.

 

[CHOO CHOO]

Sweet, isn't ac delco stock? I don't want stock or same as stock.

Sent from my DROID4 using Tapatalk 2

 

[InTruckDesign]

SuperChargerConnection.com get in touch with them, they have sets made up for the LS truck motors.

 

[Bigdaddy]

I just swapped my plugs for E3 and the wires for JBL I found on EBAY for $55. Very happy with them and the smoothness of the idle.

 

[CHOO CHOO]

Magnecor 80283. About $75.00 if you shop around.

Awesome, So I ordered these and cost me $80 w/ shipping from thmotorsports. Will let you all know how they work out.

 

[doubletapdrew]

Nothing wrong with AC Delco. A lot of the LS camaro/vette guys just use LS2 wires (on engines they've sunk thousands of dollars into upgrading). With the coil on plug systems in these Gen3 & 4 motors the wires are so short you aren't really going to notice any performance benefit from going to a more costly "low resistance" wire like you used to on distributor based engines.

 

[CHOO CHOO]

Fair enough. Seems by the concensus that stock wires are just as good. Well, they are already bought now and i am picking them up tomorrow from a fed ex shipping place.

Sent from my DROID4 using Tapatalk 2

 

[cowboyzr2]

x3 on Delco.

I've put MSD 8.5MM on both of my trucks with good results, but am also running a MSD 6A on both of them.

I would most definitely stay away from Accel wires. A few guys I know have had bad luck with them... I bought a pair once just because they were cheap. Within a couple months 3 of them went bad.