Pics of Escalade Platinum Dual Exhaust Rear Bumper Cover Hitch Cover

[felixgun]

So I pulled a trailer from LA to AL last week bc wife's transfer case on 05 Tahoe died on the highway in Alabama. Anyways I took my 2010 Tahoe that I have the esky platinum dual exhaust rear bumper cover and hitch cover on.

When I got back home I tried to put the hitch cover back on. The top piece slides into the hitch cover bracket but the hardware for the bottom two holes are missing. There is nothing for it to stay on. On the normal esky bumper they had a plastic piece that stayed in the hole. This isn't the same. If anyone has pics of the inside of the hitch cover with the hardware needed to keep it attached please post. @NathanJax do you by any chance have any pics when you had this on your Yukon?

 

[NathanJax]

If you look close, there's 2 little twist and lock circular clips...


These are the best pics I could find...

 

[felixgun]

Oh ok so it IS similar to the normal esky bumper. Do you have a part number to those two twist lock things @NathanJax ?

 

[07Burb]

 

[NathanJax]

Do you have a part number to those two twist lock things @NathanJax ?

Nope

 

[felixgun]

Lol I got some zip ties might just use those jacob[emoji23]

 

[08grey]

Some self tapping screws will do.

 

[felixgun]

That's a good idea too I think better than the zip ties

 

[08grey]

I use some 5/16 with a washer cause where I'm from they steal them.

 

[felixgun]

Jeez... Maybe the zip tie isn't a good idea.