pioneer 3200 no sound?

[Chapj366]

i am new to this so give me a break. i have a pioneer 3200 dvd installed in a 2003 yukon with the PAC OS-2CBOSE and it is bypassed with a relay everything worked fine for about 3 months then one day i was listening to it then the sound just stoped all together i havnt had the chance to even look at it yet but just wanted to get yalls feedback first thx in advanced.

 

[01HDtahoeNJN]

No clue but good luck

Sent from my SCH-I500 using Tapatalk

 

[Ironman1979]

i would pop it out of the dash and make a splice wire from the speaker wires out of teh head unit to a junk speaker and see if you ahve output there. if so start tracing wires. if not.. blown amp inside teh head unit.. replacement needed.

 

[Chapj366]

Thx guys i dont no what it was it started working by itself again but still poped hu out checked all connection everything was fine all i could think is that it might be the stock amp?

 

[blueflamed03]

sounds like a connection, now where, no idea.

 

[ScottyBoy]

Did you have stock Bose? If so, the Bose amps could be acting up. Or even if the regular stereo has a stock amp like i know tbe 00-02 ones do. If its not a loose connection, the amp may be just acting up. Try this trick before anything else. Disconnect the battery for about 5 minutes or so. Then see if it fixes itself after reconnecting the battery. Sometimes that works. And for what's involved to disconnect the battery, it's worth a shot to try it.