Pioneer AVIC-Z120BT

[Seel]

the part u have to cut will not hurt anything. if u ever put the stock radio in it will still fit like new.

ive put in 10 or so nbs and nnbs to make every thing fit nice and make the dash kit sit right, ive had the cut out the back of the dash behinde the radio.

How much cutting behind the dash and what do you use to cut it? Are we talking an extra 10 minutes of trimming or taking more dash apart to get to it? Thanks for the replies -Seel

 

[nytahoe]

oo not much right behide were the radio goes u have to cut that. if u have a air saw or a hand hacksaw blade. or u can hack it and break it out lol. if it take 10 mins thats alot

---------- Post added at 10:10 PM ---------- Previous post was at 10:08 PM ----------

the z110 in my truck dont have anypics of what u have to cut out thought i did

 

[Modded]

the part u have to cut will not hurt anything. if u ever put the stock radio in it will still fit like new.

ive put in 10 or so nbs and nnbs to make every thing fit nice and make the dash kit sit right, ive had the cut out the back of the dash behinde the radio.

Oh, well i guess it just depends on how its done.
I do know that if it is cut, there will be alot of space to use so I guess their is nothing wrong with making the install a bit easier.

 

[LILC509]

My buddy is an installer. I had him install the z110bt which is the same as the z120bt in my NNBS Yukon. He didnt have to cut behind the HU. It sits in flush and yes this the best HU ever. I has so many different features (hack mods) that I still havent been able to figure them out. avic411.com is a great info source. Make sure you do the bypass before putting it in. Also if in the near future you are going to put additional screens you should buy the RCA wires and run them, that way you dont have to take it all back out. Good luck on your install.

 

[nytahoe]

My buddy is an installer. I had him install the z110bt which is the same as the z120bt in my NNBS Yukon. He didnt have to cut behind the HU. It sits in flush and yes this the best HU ever. I has so many different features (hack mods) that I still havent been able to figure them out. avic411.com is a great info source. Make sure you do the bypass before putting it in. Also if in the near future you are going to put additional screens you should buy the RCA wires and run them, that way you dont have to take it all back out. Good luck on your install.

did u keep bose and onstar ?

 

[LILC509]

I did keep Bose but dont really care for Onstar so that is gone. I used a C2R-GM29 I believe product from PAC. I should have gotten the steering wheel controls module because that HU doesnt have a remote so everything has to be done at the HU. With the steering wheel controls if your music is loud you can turn it down or mute it quick on the steering wheel. In my area in WA cops are out looking for anything and everything to pull anybody over from now until after Labor Day.

 

[RayRay]

I had to cut the black plastic in the back to fit mine...Lots of wires with the PAC On* module and steering wheel controller.

 

[LILC509]

Lots of wires but all worth having the best of the best Nav system!