Plug wire help

[CLEAR]

I was going to change my stock plugs to some NGK tr5s. I cannot get the wires off for the life of me. I wasnt planning on replacing the wires. How can I get them off without damage?

 

[blueflamed03]

needle nose pliers may help, be gentle, work them back and forth.

 

[CLEAR]

Are tr5s a good choice?

 

[tybardy]

good choice of plug for sure, you should just invest in a set of MSD 8.5 wires though... just an opinion..

as for how to get them off... its a pain in the ass because of those heat shields that are on there... just grab hold of the boot real good and tug away! Your gonna hurt your hand a time or two

 

[blueflamed03]

Are tr5s a good choice?

NGK tr55's?

 

[tybardy]

good catch Blue!!

DO NOT GET THE TR5's as they are gapped to .060

the TR55 is the same plug, gapped to .040 (correct gap for our trucks)

---------- Post added at 04:19 PM ---------- Previous post was at 04:14 PM ----------

Also... it is always good practice to confirm the gap of the plugs you buy even if they are "pre" gapped