Post 6” Lift- Bump Stops Riding on Lower A-Arm

[Dantheman-2003]

So another issue I’m having, after the 6” Lift, my bump stops are riding on the lower A-arm. See pics. So I’m thinking I’ll crank up the keys a little bit, which gave me clearance. Took it around the block and right back to where I started, bump stops are back resting on the arm. Any thoughts? My torsion key bolts are out about 1”. Trying to get this resolved before taking in for alignment

 

[Fless]

I can't tell that from your pic but with the stock suspension the front jounce (not "bump") stops are supposed to contact the lower control arms.

"06 Escalade Build: Engine cover finished!

Got the 'Clade registered today with a vanity plate. Won't be here for a few weeks; but this is how it will look. Since MS doesn't issue front plates I got one that's personalized off ebay.

www.tahoeyukonforum.com

 

[Carolina Brown]

Yep...jounce stops are always supposed to be in contact with control arm bracket. Certainly you can adjust the keys for more lift but they should still touch.