Potential Re-Gear idea

[JMH1980]

I have a 2016 XL Denali.
6.2L w/ 8L90E drivetrain.
It comes with the 3.23 ratio gearing.
Would replacing those with factory 3.42 gears have any huge positive impacts on drivability?

 

[Marky Dissod]

... 2016 XL Denali ... 6.2L, 8L90E ... 3.23.
Would replacing those with 3.42 have any huge positive impacts on drivability?

Short answer: NO.
Long answer: you used the word 'huge' - only going from 3.23 to 3.42 will not have a HUGE impact.
That said, of course it will have an impact. Provided you drive it 'less-than-enthusiastically',
more axle gear will improve city / metro / urban MpGs,
improve unladen highway MpGs (under 65MpH or so - over that speed, MpG benefits fade),
improve towing/hauling MpG
MpG benefits will NOT be HUGE, but they'll be measurable (unless you're leadfooted).

More assertive axle gear also takes some strain off the 8L90, so it'll go longer between rebuilds too.

Please note:
1. unless using VERY tall tires, 3.73 will be overkill with 8L90; 1st gear'll become almost useless
2. for maximum MpG & durability / longevity benefits, have your ecm and tcm tuned as well

 

[swathdiver]

^^^ Can't say it any better myself!

I knew a kid with an 8-speed in his leveled 5.7 RAM with 3.92 gears. That truck would walk away from my lifted 6.2 Sierra which has a 6-speed with 3.73s on 35s, effectively making it a 3.42 ratio. Comparing timeslips, it would be about equal to my other 6.2 Sierra with 3.42s, high 14s in the quarter mile.

Here are some examples of what your effective ratios and RPMs would be with the various gear ratios:







We just completed a gear swap about 1,500 miles ago, from 3.42s to 3.73s in my 2009 Yukon XL.

 

[swathdiver]

This is the chart that RAM uses with their ZF 8-speed and 3.92 gears.

So if you want gears and care little for the cost, consider steeper gears if you want more than an incremental improvement as I've done.

 

[B-train]

^^^ Can't say it any better myself!

I knew a kid with an 8-speed in his leveled 5.7 RAM with 3.92 gears. That truck would walk away from my lifted 6.2 Sierra which has a 6-speed with 3.73s on 35s, effectively making it a 3.42 ratio. Comparing timeslips, it would be about equal to my other 6.2 Sierra with 3.42s, high 14s in the quarter mile.

Here are some examples of what your effective ratios and RPMs would be with the various gear ratios:

View attachment 445688

View attachment 445689

View attachment 445690

We just completed a gear swap about 1,500 miles ago, from 3.42s to 3.73s in my 2009 Yukon XL.

How do you like 3.73s with the 6 speed? What driving dynamics changed - good or bad?

 

[swathdiver]

How do you like 3.73s with the 6 speed? What driving dynamics changed - good or bad?

1st gear is a little shorter than before. She moves out more briskly now and where there used to be a lag when you floored it from idle, that is no more. Part throttle acceleration is noticeably faster.

Fuel economy seems better in the city and about the same on the highway but I have not begun actually measuring that yet. She made 2 passes down the 1/4 mile so far and came out about 1 mph faster on average than before.