PPV 2" Drop From NorcalSS

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

992dr

Full Access Member
Joined
Oct 8, 2009
Posts
3,163
Reaction score
1,204
Location
Eastern N.C.
If you have 2" drop coils and no spacers on your struts, you have a 4" drop up front.

Lookin good
 

guy from norcal

Full Access Member
Joined
Jul 15, 2012
Posts
622
Reaction score
327
You should have used the 10mm ring. That will give you a 2'' drop from your struts. If you didn't use any rings,That might be closer to a 2 3/4" drop with the struts.

What is your fender to ground measurements.
 

992dr

Full Access Member
Joined
Oct 8, 2009
Posts
3,163
Reaction score
1,204
Location
Eastern N.C.
Thanks @guy from norcal

@992dr - stock ppv coils, just belltech struts and didn't utilize any spacers. Pre/post measurements = -2". Is this still considered a 4" drop?

Since you had the coils in it previously, you are only measuring the 2" drop from the struts.

Yes, In total between the struts and the PPV coils, your total drop is 4" or there about :)
 
OP
OP
B

blownspyder

TYF Newbie
Joined
Oct 29, 2017
Posts
6
Reaction score
10
Stock fender to ground:

Front = 34"
Rear = 35.5"

After mods:

Front = 32"
Rear = 33.5"

Im using the 25003-008 struts, so my kit came with (8) 8mm spacers.

Per Belltech Spacer Table ....

"Lowering Height 2" - Number of Rings To Put On Strut = 0"
(meaning no rings)

You should have used the 10mm ring. That will give you a 2'' drop from your struts. If you didn't use any rings,That might be closer to a 2 3/4" drop with the struts.

What is your fender to ground measurements.
 

SidewaystheSeven

Full Access Member
Joined
Jan 7, 2016
Posts
177
Reaction score
99
Very nice! I've been looking for pics of lowered PPVs to see how mine might look. I like it!
 

Forum statistics

Threads
132,323
Posts
1,865,986
Members
96,918
Latest member
PsillyFuk
Top