Problems with LED flashers with aftermarket lights?

[DanSag]

I've had a couple sets of aftermarket lights in my vehicles, first my '99 camaro, my 09 sierra, and now I'm looking into some for my 04 Tahoe. Every set I've had I have issues with the signal lights. in the camaro having the LED's wired into the signal lights caused the flasher not to work at all, and the lights just turned on and stayed on. in my truck the vehicle recognized that the tail lights were tripping a burnt out bulb signal, causing the flasher to go twice as quick.

To the point I'm wondering if there is something i can do right off the bat to make sure this doesn't happen in my tahoe. i'm really hoping to not have issues with this again.

Thanks Guys,

Dan

 

[chauncey0337]

Get the sonar tails from ebay. Built in resistors to prevent hyper flashing and retains cruise control. A lot of members here have them and they are one of the best looking tails.
http://www.ebay.com/itm/00-06-YUKON...Parts_Accessories&vxp=mtr&hash=item25631d5c5f

Btw, in your truck you can add load resistors to eliminate hyper flashing-
http://www.ebay.com/itm/2X-6ohm-50W...Parts_Accessories&vxp=mtr&hash=item35b4d14999

 

[Pain@thepump]

many possible solutions here.

http://autolumination.com/equalizers.htm

 

[seven9st surfer]

Get the sonar tails from ebay. Built in resistors to prevent hyper flashing and retains cruise control. A lot of members here have them and they are one of the best looking tails.
http://www.ebay.com/itm/00-06-YUKON...Parts_Accessories&vxp=mtr&hash=item25631d5c5f

I just installed those lights 2 days ago. They look awesome, and no hyperflashing. I highly recommend them