Question about my barn doors

[Donnie Yukonie]

http://www.genmotorinfo.com/Picture.../REAR+ W/ZW9 +-+CK 06-16 +&pid=961217TZC16-15

#69 bushing gm 15995442 $3.02 each

#63 & 70 pin gm 15645336 $2.80 each

gmpartsgiant.com just enter the part numbers where asked. also there application is 92-95

---------- Post added at 08:33 PM ---------- Previous post was at 08:32 PM ----------

or take part numbers directly to dealer and tell them "how you like them apples!"

I use SUNknowledge all the time to appear smart

 

[mranum]

http://www.genmotorinfo.com/Picture.../REAR+ W/ZW9 +-+CK 06-16 +&pid=961217TZC16-15

#69 bushing gm 15995442 $3.02 each

#63 & 70 pin gm 15645336 $2.80 each

gmpartsgiant.com just enter the part numbers where asked. also there application is 92-95

---------- Post added at 08:33 PM ---------- Previous post was at 08:32 PM ----------

or take part numbers directly to dealer and tell them "how you like them apples!"

Thanks a bunch! I think I'll take them numbers to town with me next time I go and see what they say.

 

[mranum]

As a service to others who may be searching for some info on these pins, like I am/was. I came across this tutorial that may help.

http://bodyshopzone.com/archives/mechanical/door/GM_van_hinge_pin/greasable_pin.html

BTW-SunLitComet, I took those numbers to the dealer today. Turns out they had pins but had to order the bushings. They sure were curious as to where I got those numbers from.

 

[SunlitComet]

tell them you have classified sources.

where they like 1. you should not have those. or 2. how come we cant see those.

 

[mranum]

Changed the hinge pins and bushings on my right cargo door this afternoon. Holy chit was that a project! Ended up with a die grinder with a cut off wheel to cut the pin at the mating surfaces to get the door off then heat the ends with a torch. The bottom hinge wasn't too bad, or the bottom of the top hinge. But the head of the pin on the top hinge was a @#$%^&* *****!!!!!

Finally got it though. Shut nice but still didn't open very good. Finally figured out the weatherstrip was folding inward between the doors as it closes and causes a bind when you go to open it. Guess that will be added to the list to work on.