BTM - Black trannys matter.
Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)
- Thread starter randeez
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
randeez
Full Access Member
Yea hopefully it'll go back together without fighting too much. Also forgot when I was taking it out kinda pissed I ripped the dipstick out of it lol. So I need to order another one of those, along with abunch of fluid, dex6 and fluid for the np149...going to try the demo "H" spec or whatever. Dex 6 seems so thin
i may go back to belt drive for water pump and steering pump also - mostly steering because its already a little iffy at real low speed with the electric pump bigger tires i think its going to be a real pain lol.
may do a camaro water pump since the outlet comes out on the driverside better
was under looking at stuff when i put the tranny under this evening, the diff drop is probably going to hit the front sway bar so i may have to drop it anyway. and the crossover for the trick kit im not sure how its going to work with a 6" drop so i may have to redo the cross over pipe but whatevers not too worried gonna plow into it and see what it needs
oh, and front axles - im not sure how its going to work out. given the kits come with a spacer they are needed to be longer apparently. im already using spacers so who knows... i think cognito has some longer ones than i have now not sure if that will do it, or im going to have to revisit frankenaxles or talk to RCV
Last edited:
OP
OP
randeez
Full Access Member
OP
OP
randeez
Full Access Member
They must know how fast I work
pwtr02ss
Full Access Member
I bet your UPS man is like "this mother*cker" every time you get something heavy. I feel bad for my people lol
You pick out them forces yet?
Last edited:
OP
OP
randeez
Full Access Member
Transmission is in, converter bolts done. Mosquitoes and bugs out in force so I quit a like after dark.
Np149 nearly back together. Looked for some sealant to put the halves back together but none to be found here. So it's sitting with the halves a lil apart waiting till tomorrow I guess. I'll run around and find some hopefully
opened up some lift kits boxes, pretty impressed! everything looks beefy and has a nice kinda matte black finish little texture on it. i think most everything for the front came in (as well as the gmt900 front box) missing the box with rear springs and stuff but i may get started on the front this weekend. and knock out some of the bigger pieces
and i picked up injectors after getting them cleaned - one ended up pretty ***** which i kinda had a feeling since fuel trims would be wack low psi but fine with high psi they replaced it for like 1/2 price
Np149 nearly back together. Looked for some sealant to put the halves back together but none to be found here. So it's sitting with the halves a lil apart waiting till tomorrow I guess. I'll run around and find some hopefully
opened up some lift kits boxes, pretty impressed! everything looks beefy and has a nice kinda matte black finish little texture on it. i think most everything for the front came in (as well as the gmt900 front box) missing the box with rear springs and stuff but i may get started on the front this weekend. and knock out some of the bigger pieces
and i picked up injectors after getting them cleaned - one ended up pretty ***** which i kinda had a feeling since fuel trims would be wack low psi but fine with high psi they replaced it for like 1/2 price
Last edited:
George B
¯\_(ツ)_/¯
Don’t have that problem here…
pwtr02ss
Full Access Member
Man, you work quick. How bad was the rebuild of the transfer case? My buddies sss is leaking. I think it has pump rub through so we'll possibly have to get a good half, if we can't find a good used one
