Reaiming headlights?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tim Quigley

Full Access Member
Joined
Nov 16, 2015
Posts
188
Reaction score
41
Location
Kingston NY
Okay first off I think these are the best headlights I have ever seen in a vehicle. I'm only having one problem. I'm not sure how to get the proper angle of the headlights. Or even how to adjust them. Can someone please help?

IMG_7103.JPG

IMG_7105.JPG
 

1992rs

Full Access Member
Joined
May 8, 2015
Posts
287
Reaction score
217
Location
OR
Im not sure if you're talking about the actual act of physically adjusting your headlights or how they should be properly aimed, but I'll leave this picture for you and anyone else That I found on HID Planet when I was researching how to aim after my retrofit

- Red line is the height from projector to ground.
- Blue line represents the DOT standard 2.1-2.5 drop. You can go as low as a 3in drop, as thats European Standard, but I personally wouldn't.

*Take all this with a grain of salt if you dont have a tabletop flat cutoff line*

aiming--sortaJPGSMALLrevised-2nd.jpg
 

ISU-152

Full Access Member
Joined
Aug 12, 2016
Posts
1,061
Reaction score
294
Should be two torx bolts under the hood for each light. One does vertical other horizontal. Not familiar with your year though
 

nixxxster

TYF Newbie
Joined
May 2, 2010
Posts
26
Reaction score
4
Can you post some pic of the beam pattern. Some night shoot too.
 

Forum statistics

Threads
132,373
Posts
1,866,944
Members
96,999
Latest member
smo730
Top