Rear Air shock
- Thread starter ali saleh
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sasquatch
Full Access Member
Yes just order shocks for a non autoride truck, They bolt right in place of the air shocks.
Does it cause any dashboard lights or beeps ? I have 01 denali
Yes unless you disable Autoride. Disconnect battery, pull fuse under hood labeled RTD, reconnect battery. Done.
Thank you
Matahoe
Full Access Member
Yes but ive read you need different coil springs or the rear will sag a bit.
Sasquatch
Full Access Member
I have the stock autoride springs with billstein 5100 shocks, It sits slightly lower but certainly no sag.
I can have two passengers 300 pounds of dogs and a few hundred pounds of other stuff and it sits level. Unless you plan to haul more weight or tow a trailer with a lot of tongue weight you won`t have a problem.
I can have two passengers 300 pounds of dogs and a few hundred pounds of other stuff and it sits level. Unless you plan to haul more weight or tow a trailer with a lot of tongue weight you won`t have a problem.
Matahoe
Full Access Member
Regardless the spring rate is less. Bilstein says to get the matched springs from them for the 5100 shocks. The stock ones will not do.
Sasquatch
Full Access Member
Well as i said before they work perfectly and do just fine but thanks for the input. Now billstein wouldn`t be saying that just to make more money by telling people that they need them would they?
