Rear defroster not working

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
SnowDrifter

SnowDrifter

Full Access Member
Joined
Sep 5, 2016
Posts
2,439
Reaction score
2,681
Location
Washington. The desert side not the Starbucks side
The closest I see is the Standard Motor Products S-1321, but it doesn't seem to have the pin guide blue cover on the female connector. Look it up and there are additional pics online.

View attachment 387864
View attachment 387865
Nice thanks!
Managed to find the OE one

But even that doesn't have the pin guide. Strange
Can't seem to find the actual harness anywhere though. I hate cutting wires and rather just re-harness and be done, but I can't find a part number for it anywhere. Grrrrr
 

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
12,155
Reaction score
24,782
Location
Elev 5,280
Are you looking for the liftgate harness, or the body harness? Not sure where the body harness goes.
 

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
12,155
Reaction score
24,782
Location
Elev 5,280
All I see for the liftgate harness is GM 15118093. Good luck with availability if that's the one.

EDIT: maybe 40438, 121165, or 15173014 SWAGes
 
Last edited:

George B

¯\_(ツ)_/¯
Joined
Feb 5, 2020
Posts
7,789
Reaction score
18,675
Location
Oconomowoc, Wisconsin 53066
Found the lift-gate side I think.


 

George B

¯\_(ツ)_/¯
Joined
Feb 5, 2020
Posts
7,789
Reaction score
18,675
Location
Oconomowoc, Wisconsin 53066
I’m not one to do half assed repairs but hear me out.

What if you de-pin the four bad pins from connectors and then plug them back together. Then, run a pair of wires though the spaces in the connectors and solder/heatshrink them. You can force some RTV throught the connector and be on your way. You may never need to touch that connector again.

Just tossing it out there.
 

crownvic31

Full Access Member
Joined
Jun 13, 2022
Posts
208
Reaction score
174
I’m not one to do half assed repairs but hear me out.

What if you de-pin the four bad pins from connectors and then plug them back together. Then, run a pair of wires though the spaces in the connectors and solder/heatshrink them. You can force some RTV throught the connector and be on your way. You may never need to touch that connector again.

Just tossing it out there.

Seen this done on youtube and it works nicely.
 

Forum statistics

Threads
132,730
Posts
1,873,300
Members
97,559
Latest member
blanchard7684

Latest posts

Top