Rearview Mirror Power Adapter

[ARAMP1]

I was hoping to power my dashcam off of the rearview mirror, but haven't been able to find an adapter for GM. Something like in the pic. I'd rather not run a wire down the A pillar. Any ideas?

 

[GeroniMoe]

There don't appear to be many that work for our beloved chariots... I'm in the process of trying to decide the best route for my own install (2020 Tahoe LT).

There are a number of other threads on here that address the various ways you can accomplish this, including ones that don't require running wiring beyond the top/center area of the windshield (ie stealing power from the rearview mirror, overhead console controls, etc.)

When I decide what to do with mine, I'll post back here with my solution(s) and results...

 

[E_S_D]

Would this work?

21-24 Suburban/Tahoe/ Yukon Dash Cam Harness

This harness is for installing your dash cam into your 2021-2024 Suburban/Tahoe/Yukon. This harness saves you from splicing and/or entering pins into your car's wiring harness. This plug and play harness connects inline at the rear-view so you will have no wires showing. This harness will...

www.gen5diy.com

 

[Dewally]

Would this work?

21-24 Suburban/Tahoe/ Yukon Dash Cam Harness

This harness is for installing your dash cam into your 2021-2024 Suburban/Tahoe/Yukon. This harness saves you from splicing and/or entering pins into your car's wiring harness. This plug and play harness connects inline at the rear-view so you will have no wires showing. This harness will...

www.gen5diy.com

I am currently installing this harness and have tested it to ensure it works perfectly. It works.

The problem I am having is getting it into the enclosure to shut everything back up. Installation would be very easy if it weren’t for the size and bulk of the harness.