Recent weirdness

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
liquify33

liquify33

Full Access Member
Joined
Jan 21, 2019
Posts
351
Reaction score
337
Location
Houston
To add even more confusion to the spark plug mix the ones I linked and ordered from Amazon in November now says Does Not Fit. They did then and the reason I ordered them was this thread:
https://www.tahoeyukonforum.com/threads/spark-plugs.34834/#post-409479

Sunlit disappeared before my time here but his posts often come up in my research. I’ll hit up a local store and put eyeballs on some Delco platinums.
Now I’m wondering if the fuel cleaner was cleaning the fouling off the plugs like the video from 2018 I linked earlier. Same symptoms down to the cylinder though my idle is good. Disappointing but better than a fuel pump or replacing that damn pressure regulator again.
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,619
Reaction score
26,342
Location
Treasure Coast, Florida
@swathdiver
LT was around +9-10% today at 75 up and down the highway. ST was 5ish depending on up or down the overpassed.
Idle, both were close to 0

Well, I don't think anything is wrong there with those numbers but mine behaves the opposite. At idle my trims run in the negative and they zero out or near so once a steady speed is achieved. But we're dealing with different generation engines here and I'm less familiar with yours.
 
OP
OP
liquify33

liquify33

Full Access Member
Joined
Jan 21, 2019
Posts
351
Reaction score
337
Location
Houston
Well, I don't think anything is wrong there with those numbers but mine behaves the opposite. At idle my trims run in the negative and they zero out or near so once a steady speed is achieved. But we're dealing with different generation engines here and I'm less familiar with yours.
A black bear tune is on the wishlist but I feel it would be better to get ignition sorted first. Fairly certain I installed LS generation plugs on a Vortec.

I’ll have new plugs in Sunday, weather permitting. At the very least I’m going to pull a couple for eyeball inspection.
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,619
Reaction score
26,342
Location
Treasure Coast, Florida
A black bear tune is on the wishlist but I feel it would be better to get ignition sorted first. Fairly certain I installed LS generation plugs on a Vortec.

I’ll have new plugs in Sunday, weather permitting. At the very least I’m going to pull a couple for eyeball inspection.

I thought that about the plugs but do not know what they are running. Let me see...
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,619
Reaction score
26,342
Location
Treasure Coast, Florida
I’ll have new plugs in Sunday, weather permitting. At the very least I’m going to pull a couple for eyeball inspection.

ACDelco lists these:

#14 Rapidfire, 41-902 Double Platinum, 41-993 Iridium, R44LTS6 Conventional

All are gapped to .060"

If this were mine, I'd pick one of the latter two.
 
OP
OP
liquify33

liquify33

Full Access Member
Joined
Jan 21, 2019
Posts
351
Reaction score
337
Location
Houston
ACDelco lists these:

#14 Rapidfire, 41-902 Double Platinum, 41-993 Iridium, R44LTS6 Conventional

All are gapped to .060"

If this were mine, I'd pick one of the latter two.
The ones I pulled were the LTS6
Oreilly down the street has em.

ETA: it’s got 41-993’s now but .040
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,619
Reaction score
26,342
Location
Treasure Coast, Florida
The ones I pulled were the LTS6
Oreilly down the street has em.

ETA: it’s got 41-993’s now but .040

If you are handy with pliers and feeler gauges, you can re-gap them to .060" without putting pressure on the electrodes. I bet that is the source of the misfires.
 

Forum statistics

Threads
132,377
Posts
1,867,029
Members
97,014
Latest member
AustinC
Top