Remote Start Troubleshooting

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
DaveO9

DaveO9

Full Access Member
Joined
Oct 25, 2022
Posts
223
Reaction score
436
Location
Vancouver, WA
Found a company that does TCCM programming...


Thanks, I will contact them to see if they can help.

One thing I was thinking about, regarding the fact that RA does not list a TCCM for single speed t-case: I wonder if the 2-speed one covers both single and 2-speed? I noticed that my original TCCM P/N is listed in the long list of OEM TCCMs it replaces.


Thanks for posting these screen shots. I went through every parameter and compared with mine. The only one that was significantly different was "Range Actuator Command" - yours is 0%, mine is 49%. Not sure if that means anything. I was doing the diagnostic key-on, engine-off, in 2-high. Looks like you were in 2-high as well.

I re-ran the ATC learn procedure with the Tech 2, just for grins. No change to remote start status.
 

mikez71

Full Access Member
Joined
Mar 9, 2023
Posts
1,492
Reaction score
1,756
Interesting, I was also key-on, engine-off, 2-hi.
And your theory makes sense why we only see one TCCM module forsale.

Might check what the Tech2 shows with your old TCCM regarding "range actuator command"
 
Last edited:

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
19,759
Reaction score
26,653
Location
Treasure Coast, Florida
One thing I was thinking about, regarding the fact that RA does not list a TCCM for single speed t-case: I wonder if the 2-speed one covers both single and 2-speed? I noticed that my original TCCM P/N is listed in the long list of OEM TCCMs it replaces.
ACDelco lists 24261367 covering the NP0, NQF and NQH transfer cases.
 

Forum statistics

Threads
132,737
Posts
1,873,371
Members
97,565
Latest member
Champ74

Latest posts

Top