Replace High Beam Ligts to LED wont fit without Body work. Need help and Tips.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DJPoertsch

Full Access Member
Joined
Mar 7, 2018
Posts
115
Reaction score
76
Hello my Chevy friends.
I have a question about High Beam Headlight 9005, I have used my Tahoe2007 LTZ LED 9005 High Beam but they are just too long. Once installed, I can not screw my headlights anymore. They stuck to the back of the frame of the radiator grille
How could you do that? I do not want to get up on the bracket, because I came back further with my headlight. That would not be wise. Do you have LED Lights in the United States LED with the 90 degree finish, so i could install the original lamps without having to cut anything.
I have already installed HID kits in my low beams. But there was room for me. I am aware that the high beam HID Xenon is not good for the lifetime of the lights. Have not earned experience about that.

Could you give me information or links where i can find parts they would fit without body frame work. Thanks to all for your help.

I show you 2 pictures how my actually Lights are looking. And you could see i need more then 1,5" more Room to get my Headlight back in.

IMG_20180828_192249.jpg s-l1600.jpg
 
OP
OP
DJPoertsch

DJPoertsch

Full Access Member
Joined
Mar 7, 2018
Posts
115
Reaction score
76
OP
OP
DJPoertsch

DJPoertsch

Full Access Member
Joined
Mar 7, 2018
Posts
115
Reaction score
76
I have to look in the manual if i have the limited Tahoe LTZ Waterproof James Bond Submarine Model. ;)
 

Forum statistics

Threads
132,737
Posts
1,873,401
Members
97,565
Latest member
Champ74
Top