Replacing Denali wood trim with Z71 Aluminum

[Blackmax]

U could paint ur interior pieces.. Dat prolly be best

---------- Post added at 08:11 AM ---------- Previous post was at 07:48 AM ----------

So the 07-09 is diffrent from the 10-13??

 

[neutube]

So the 07-09 is diffrent from the 10-13??

yes, on the 2010+ the window switch trim is spaced differently

 

[TS81]

http://www.rvinyl.com/Dash-Kit.html
Or just get whatever design you want in a wrap and wrap it like many of us have done with carbon fiber like in the pic

Would you kindly give me the link of this Carbon Fibre trim on thier websit ?

GT-N7100

 

[neutube]

U could paint ur interior pieces.. Dat prolly be best

---------- Post added at 08:11 AM ---------- Previous post was at 07:48 AM ----------

So the 07-09 is diffrent from the 10-13??

Would you kindly give me the link of this Carbon Fibre trim on thier websit ?

GT-N7100

Dude, go with 3M Scotchprint 1080 Wrap - better quality and more user friendly.. you can find it on e-bay for like $18
http://solutions.3m.com/wps/portal/3M/en_US/Graphics/3Mgraphics/Products/Series1080/

I only use rvinyl for exterior light tinting
these "kits" are just pre-cut vinyl wrap
3M is way easier to apply, look up "1080 scotchprint" on you.tube

 

[dnme305]

I have an 07 Tahoe with wood grain trim. Would like to swap out with the brushed aluminum trim which is around the A/C vents. Is the removal an easy process and will the trim snap back in or does it have to be glued back on somehow?

Also where could I find the trim thanks in advance

 

[neutube]

I have an 07 Tahoe with wood grain trim. Would like to swap out with the brushed aluminum trim which is around the A/C vents. Is the removal an easy process and will the trim snap back in or does it have to be glued back on somehow?

Also where could I find the trim thanks in advance

no glue, (may have some adhesive behind radio bezel from the factory)
just clips.. here is one write up: http://www.tahoeyukonforum.com/forum/showthread.php?t=36443&page=10&highlight=matte+black
options are here, e-bay, online parts store, dealership
sticky at the top of the thread has part numbers.. ($$$)
Z71 Brushed Trim
15870240 - Driver side vent/surround
15923338 - Center vents and long plate W/ DIC
25807742 - Passenger side vent/surround
15211885 - Radio bezel
25818082 - Center console cup holder
25924154 - LF window switch bezel w/ power folding mirrors
15920642 - RF window switch bezel
15217595 - LR window switch bezel
15217598 - RR window switch bezel

 

[yooks11]

Dude, go with 3M Scotchprint 1080 Wrap - better quality and more user friendly.. you can find it on e-bay for like $18
http://solutions.3m.com/wps/portal/3M/en_US/Graphics/3Mgraphics/Products/Series1080/

I only use rvinyl for exterior light tinting
these "kits" are just pre-cut vinyl wrap
3M is way easier to apply, look up "1080 scotchprint" on you.tube

Did you remove the parts and apply the wrap? Also, did you have to heat it up?

 

[cleaningman94]

Yeah same here was just talking about how I wonder of anyone would wanna trade. Mine is in excellent shape out of a 2008 chevy tahoe. Would be interested in trading for brushed aluminum or selling it.

 

[dnme305]

no glue, (may have some adhesive behind radio bezel from the factory)
just clips.. here is one write up: http://www.tahoeyukonforum.com/forum/showthread.php?t=36443&page=10&highlight=matte+black
options are here, e-bay, online parts store, dealership
sticky at the top of the thread has part numbers.. ($$$)
Z71 Brushed Trim
15870240 - Driver side vent/surround
15923338 - Center vents and long plate W/ DIC
25807742 - Passenger side vent/surround
15211885 - Radio bezel
25818082 - Center console cup holder
25924154 - LF window switch bezel w/ power folding mirrors
15920642 - RF window switch bezel
15217595 - LR window switch bezel
15217598 - RR window switch bezel

thanks

 

[neutube]

Did you remove the parts and apply the wrap? Also, did you have to heat it up?

best to remove the parts to get a full wrap and better look, heat gun on low,, or hair dryer helps stretch around edges and get in corners and not so flat parts - 3M gold squeegee is good also