Replacing engine

[rican4lfe]

Currently working on swapping my stock 350 for my mildly altered 350 any tips of the best way of doing it its going on a 4x4 tahoe.. Have swap engines before but for old ass cars. Strait take bolts out and remove. This will be a first with all the electrnics and the IFS... Any guides, clues, anything thanks!!!!

 

[Trippers99hoe]

As long as it is a vortech the swap will be easy,1996 up to 1999 will be the same.

 

[El Rey]

yo whats up papa had a question i have a 1999 4 door LT tahoe how much does it cost for a rebuit engine

 

[rican4lfe]

jasper stock 350 run about 2k maybe less.....I had mine done on my 97 con and some ******* t bone me and now I just bought a 96 hoe and am about to swap engines...

 

[Ceejkay]

its pretty straight forward.. some will say disconnect the exhaust manifolds at the collectors.. triple check everything before you attempt to pull it.. also it would be easier and safer to pull the engine out with disconnecting the tq converter.. i picked up a brand new engine from jegs for 2k to my door...

 

[NYFreakinRican7]

El Rey my family is from the lower east side also. My mom was raised on baruch and i was married in St. Marys

 

[SeanEboy]

Rydell Chevrolet, $2050 for a brand new vortec to the door....

 

[electro]

Or you can replace your driver side seat arm from the dealer for $689!! Shoot me.

 

[SunlitComet]

Under 2k for a new gm vortec from Jegs.

 

[taylorjm]

Just out of curiosity, how hard is it to swap out an engine? Assuming of course, you have a means to lift it. Is it really that hard to disconnect everything? How long would you think a swap would take?