Rim load rating calculation?

[Jolly Roger]

Does anyone have a rim load rating calculator?

The internet is just about useless, been searching for an hour and cant find this simple information!
Im so fed up. All I get is tire size load rating..

Shopping for rims and I just need to know what load rating rims to shop for.
I dont tow, but I may in the future....
2007 Chevy Tahoe 5.3 4x4

Is it calculated by maximum GVWR? Axle weight?

Any help greatly appreciated

 

[Jolly Roger]

This web site says this:
"Wheel load rating requirements are determined by dividing the vehicles heaviest gross axle weight rating by 2."
https://www.tsw.com/explore/wheel-load-rating.php

is this right?

rims im looking at have a loade rating of 2650lbs..

 

[swathdiver]

Well, you're Tahoe's GRAWR (Gross Rear Axle Weight Rating) is or should be 4,100 pounds. So you'd want each of your wheels AND each of your tires to support at least half of that or 2,050 pounds each.

It's good of you to check that out, I once was looking at some nice wheels and saw that they would not match my rear axle's capacity.

 

[Jolly Roger]

Thanks James! I see many rims here on this forum that are not up to par...

 

[swathdiver]

Thanks James! I see many rims here on this forum that are not up to par...

Yep, all hat no cattle, or all show and no tow. They get bent rather easily too.

 

[BG1988]

This web site says this:
"Wheel load rating requirements are determined by dividing the vehicles heaviest gross axle weight rating by 2."
https://www.tsw.com/explore/wheel-load-rating.php

is this right?

rims im looking at have a loade rating of 2650lbs..

if your towing you will need to use LT(light truck) tires and not P rated tire(passenger)




passanger tires are only 4 ply

LT tires are 4ply(heavy duty)
or 10/12ply

 

[iamdub]

Good for you for being mindful of this.

I can only hope my wheels can support my Tahoe. A wise man (or wise ass?) here once told me I weakened my wheels because I removed the cladding that was "structural".

 

[swathdiver]

if your towing you will need to use LT(light truck) tires and not P rated tire(passenger)

I think GM would disagree, they sell these things to tow with right off the lot and few are OE equipped with LT tires.

A wise man (or wise ass?) here once told me I weakened my wheels because I removed the cladding that was "structural".

I think he was the latter, plastic adds little to structural strength but looks good for those who like those looks.

 

[Jolly Roger]

if your towing you will need to use LT(light truck) tires and not P rated tire(passenger)




passanger tires are only 4 ply

LT tires are 4ply(heavy duty)
or 10/12ply

Going with load range E tires. Thus another reason to make sure the rims were up to *****. Dont wanna put 70lbs tires on some silly dandelion spoked rice rocket wheels...

 

[Jolly Roger]

Is it normal for a wheel to have this much cut out of the inside? I've been comparing two companies and this one is different in the fact that it has so much material cut out from the back side compared to the other brand.