Rocker Panel DIY? 03 yukon

[Reeder31788]

Hi Dash I was quoted at 500 fixing both of my rocker panels, damage is not absolutely devastating for wondering if people have had any success following any particular YouTube videos or anything for that matter. I picked up some metal sheathing and body filler at the auto parts store, let me know if anybody can share any input thank you

 

[Jason in DLH]

This is a good video....

 

[Jason in DLH]

Sorry...that’s a good video, but this is more applicable to your hole...

 

[Tonyrodz]

Sorry...that’s a good video, but this is more applicable to your hole...

He makes it look so easy.

 

[Jason in DLH]

Oops...that’s the one where he welds in a piece. There’s one where he uses a piece of bondo mesh and simply bondos it in place for a quick and easy fix.

 

[Jason in DLH]

Also, I have used https://www.automotivetouchup.com/

for paint matching with great results!

 

[jimweis]

I just covered mine up...
https://www.tahoeyukonforum.com/threads/trail-armor-for-yukon-tahoe.93208/#post-1112474

 

[George B]

Oops...that’s the one where he welds in a piece. There’s one where he uses a piece of bondo mesh and simply bondos it in place for a quick and easy fix.

Yuck! I don’t remember how many chicken wire, expanding foam, bondo cousin lovin repairs I have seen.

 

[03catburban]

Not hard cut out bad and seal metal thats left then weld on a slip over rocker

 

[Merc1973]

I just covered mine up...
https://www.tahoeyukonforum.com/threads/trail-armor-for-yukon-tahoe.93208/#post-1112474

Nice job. I might go that route for mine. No painting and clearcoat is always a plus...