Roof rack and skid plates design , who's in ?

[polo451]

That's looks good! Wish i had a newer truck too or that on. What is the weight limit on that?

well that's a good question , guess i'll climb and jump on it and hope for the best !

 

[blackelky]

If anything it would be worth getting skid plates just to protect the catalytic converter.

 

[duke90]

Any update on this?

 

[GeroniMoe]

I've been banging my head against the question of how to connect the flush-rail mounting points to a rack assembled from extrusion rails - but this looks great!

I'd love to see what the cost would be for one of your racks! I have a 2020 Tahoe - no sunroof, but the flush rails look like they might be the same anyway...

 

[Oh Kee Pah]

@Polo

Hey Guys , sorry for the wait so here it is on my car !
super strong and easy to install on the 6 stock rail bolt holes

of course this is the first i made so i had to do some adjustments , but overall i'm happy with it ...

Job well done! Looks great, IMO.

Have you done anything in terms of underside armor/protection? I would certainly be interested in those too.
Wider fender flares, absolutely! What kind of $ amounts are you talking when you say, "expensive?"..

 

[BacDoc]

The roof racks look great! If you can get them to fit my 2024 Tahoe I would like to buy that. Please update with the price!

 

[Kekle]

Hey Guys , sorry for the wait so here it is on my car !
super strong and easy to install on the 6 stock rail bolt holes

of course this is the first i made so i had to do some adjustments , but overall i'm happy with it .
i made some 3dprinted spacers for the rails as they were a bit short, the final won't have those .and the spoiler will change a bit for an even better aero.
i drove 500 miles with it , up to 85mph , no noise !
and for those who want to keep a low profile you can see it sticks out only a few inches up , like 3"

i have some hardware for the rails , to bolt accessories.

this one is the short version as i have a suroof , i would have to see if a longer version is possible as the rails have a bend.

what do you think ?

if some of you want one i can make some , and i can do custom colors , logos whatever you want !




View attachment 411670View attachment 411671View attachment 411672

Hey Guys , sorry for the wait so here it is on my car !
super strong and easy to install on the 6 stock rail bolt holes

of course this is the first i made so i had to do some adjustments , but overall i'm happy with it .
i made some 3dprinted spacers for the rails as they were a bit short, the final won't have those .and the spoiler will change a bit for an even better aero.
i drove 500 miles with it , up to 85mph , no noise !
and for those who want to keep a low profile you can see it sticks out only a few inches up , like 3"

i have some hardware for the rails , to bolt accessories.

this one is the short version as i have a suroof , i would have to see if a longer version is possible as the rails have a bend.

what do you think ?

if some of you want one i can make some , and i can do custom colors , logos whatever you want !




View attachment 411670View attachment 411671View attachment 411672

How wide is the rack? Will it fit a 4x8 sheet of plywood?

 

[Fless]

How wide is the rack? Will it fit a 4x8 sheet of plywood?

That member hasn't been on here since before Thanksgiving 2023.