rubbing issues

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ceejkay

Full Access Member
Joined
Apr 8, 2011
Posts
567
Reaction score
22
Location
Ft. Lauderdale, FL
ok so when i go off road or anything more than a speed bump i get rubbing. my rubbing occurs in the top of the wheel well, on the front fenders no where else. it doesnt matter if im in a turn or not. i dont have bump stops. so my question is will bump stops help that? if so do they make hydraulic bump stops for our trucks. it hits pretty hard. or would a little more crank help, i dont know how much they are cranked if any. i did put a 2" block in the rear. tire size is in the signature, along with the way it sits.
 

DaRosa218

The Dude abides
Joined
Jul 30, 2010
Posts
993
Reaction score
784
Location
Modesto, California
I'd look into doing lift keys for the front and a, "Add-a-leaf" for the rear. It will give you another 2" of lift and resolve your rubbing issues. It also has a nice ride with this setup :)
 

Dowsewashere

Member
Joined
Jul 6, 2013
Posts
56
Reaction score
0
Your correct they do nothing. As long as you have less than 3 boot ripples touching your ok. can we get a picture of the angles you currently sit at
 
OP
OP
Ceejkay

Ceejkay

Full Access Member
Joined
Apr 8, 2011
Posts
567
Reaction score
22
Location
Ft. Lauderdale, FL
angles as requested. this is from the passenger side, driver side is identical. sorry its so dirty i was offroad yesterday and havent cleaned it yet
outer
IMAG0394_zps14e8f50c.jpg
IMAG0395_zps77e13c2a.jpg
inner
IMAG0399_zpsec72ce20.jpg
IMAG0403_zpsdfcea376.jpg
 

Forum statistics

Threads
132,425
Posts
1,867,931
Members
97,106
Latest member
Jellis02

Latest posts

Top