CJ Rodarme
Full Access Member
I'm currently in the market for another truck, preferably a Tahoe/Yukon/especially Escalade, but I would also be ok with a 1500 truck, even with the 4.3. Basically, unless there's some screaming deal I want a GMT800 half-ton truck, outside of that I could care less about drivetrain. I am realizing that lifting the truck I will be taking to college/dailying just isn't going to be practical lifted with a bunch of mods. But, I have a bunch of parts that I don't want to go to waste, and still want a "cool" truck. So I came up with getting a copart/salvage title truck. It'll be way cheaper, and I wont feel bad about ruining it with a big lift etc. Plus if I wreck, blow it up, etc. I wont be stuck, I can just pull my parts, junk it and get another junk rig. I'm not looking for resale value, so I don't care about the compromised title. I don't really have the money to buy a whole good truck, nor am I interested in it. As far as fixing a truck up, I am mechanically inclined to do most of the potential work to a truck. I used to work at a junkyard, work at a Les Schwab right now and have quite a bit of tools. I understand that I'd be taking on a project, but I feel that its smarter to save the truck that I know the full history on that's been well maintained instead of compromising it.
I wouldn't be comfortable with any body damage that can't be fixed by new panels. Body doesn't have to be perfect by any means but I don't want anything with a crushed in rear quarter panel. Front end damage would be "ideal" so I could do a cateye swap. Blown motor isn't ideal, but I could work with it. Blown tranny also not ideal, but I'd be more inclined to get one with a blown tranny than a blown motor since I can rebuild the transmission a lot easier than I could rebuild a motor (not that rebuilding a transmission is easy lol). Scratches, rust etc. I don't care, cosmetic damage really isn't an issue. No busted frames for sure.
So I would like opinions and advice on this. Especially if anyone has personal experience with something like this.
I wouldn't be comfortable with any body damage that can't be fixed by new panels. Body doesn't have to be perfect by any means but I don't want anything with a crushed in rear quarter panel. Front end damage would be "ideal" so I could do a cateye swap. Blown motor isn't ideal, but I could work with it. Blown tranny also not ideal, but I'd be more inclined to get one with a blown tranny than a blown motor since I can rebuild the transmission a lot easier than I could rebuild a motor (not that rebuilding a transmission is easy lol). Scratches, rust etc. I don't care, cosmetic damage really isn't an issue. No busted frames for sure.
So I would like opinions and advice on this. Especially if anyone has personal experience with something like this.