Seat Motor

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

2Seven

Member
Joined
Dec 17, 2022
Posts
38
Reaction score
83
Location
Wylie, TX
My driver's seat will not always move front to back. The other adjustments are fine. Is this the motor going out?

Thanks!
 

Onlyone

Full Access Member
Joined
Nov 9, 2022
Posts
256
Reaction score
646
Location
New Mexico
My driver's seat will not always move front to back. The other adjustments are fine. Is this the motor going out?

Thanks!
Most likely, but you could lube the slides and try moving the seat around with no one in it after that. I would use some penetrating oil first on all the moving areas.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
My driver's seat will not always move front to back. The other adjustments are fine. Is this the motor going out?

Thanks!
It could be the switch too. Does it make any clicking noises when you operate the switch back and forth or is there silence?
Edit: not sure if the passenger switch could be swapped to the driver side to troubleshoot or if the connectors are different but it’s worth looking.
 

89Suburban

Bull in the china shop
Supporting Member
Joined
Jan 10, 2013
Posts
15,085
Reaction score
41,752
Location
SE PA
If you bottom out the screw drives on these seat motors they can and will bind on the higher mileage vehicles. If you rock the seat switch back and forth and feel it trying to move but binding you can break it loose with some pliers and get it to work again.
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,340
Reaction score
9,921
Make sure that the screw drives are not contaminated with debris. I have 2 White Shepherds that go with me everywhere in my truck, and their shedded hair got wrapped up on the screw drives and hindered the movement of the seat.
 
Last edited:
OP
OP
2Seven

2Seven

Member
Joined
Dec 17, 2022
Posts
38
Reaction score
83
Location
Wylie, TX
It seems like it moves forward ok and if I click the switch back and forth it will go backward. Maybe I need to lubricate the tracks.
 

Forum statistics

Threads
132,307
Posts
1,865,722
Members
96,896
Latest member
grass209
Top