Spectralens PPV Updates

[techbiker]

@spectralen You got a damn great deal on that 3-cup jump seat as you have greedy sellers asking $300+ for them. Looks 100X better than the 'crate' you had before too. Rest of the truck's looking solid as well.

Seconded! Your interior looks great. I paid $400 for a jump seat on Ebay because they are hard as hell to find. Fortunately a local guy helped me with an inexpensive rear bench and free door panels, making up for the expense.

Does your roll sensor (thing in floor) still work? Was there any other way to make room for the jump seat?

 

[2011SSVHOE]

Not a lot of leg room, but a whole lot of storage and sweet cup holders.

looking good!!

 

[spectralen]

Does your roll sensor (thing in floor) still work? Was there any other way to make room for the jump seat?[/QUOTE]

Roll sensor? How does it work? The area I cut off was basically covering the portion that has 2 screws holding down the bottom piece. I thought it has something to do with the air bags because of the yellow connectors inside of it.

 

[CrashTestDummy]

That milk crate console was pretty ghetto. But functional, for sure.

 

[Polease]

Looks like a pretty simple install. thanks for the pics

 

[spectralen]

I was trying to remove the liftgate bowtie emblem for a more clean look on the back. I found that there are some pins that line it up and then adhesive. Because of the pins, I will be left with holes exposed.
Has anyone ever replaced the cover with a Yukon cover that has no emblem? Wondering if it's a straight deal with no issues to do the swap.

 

[spectralen]

What about gloss black door handle covers? I see them on ebay and they are alot cheaper than new handles. I'm just thinking more gloss black than flat looks nicer.

 

[RichardCranium]

I was trying to remove the liftgate bowtie emblem for a more clean look on the back. I found that there are some pins that line it up and then adhesive. Because of the pins, I will be left with holes exposed.
Has anyone ever replaced the cover with a Yukon cover that has no emblem? Wondering if it's a straight deal with no issues to do the swap.

View attachment 189212 View attachment 189213

Good idea, I wonder now myself.

I put billet bowties on the front and rear of my old 07 LT and they looked ok, but a bowtie-less rear would look good. Then again I've already got holes in my tailgate from the LED's that were installed, if I ever decide to get them addresses I could probably bundle it all together in the body shop.

If you find a fix and a cross-reference for a part that eliminates, tag me back in if you can remember. I'll keep checking probably anyways, I like watching other folks builds.

 

[spectralen]

I will try and remember.

 

[Ron C]

I was trying to remove the liftgate bowtie emblem for a more clean look on the back. I found that there are some pins that line it up and then adhesive. Because of the pins, I will be left with holes exposed.
Has anyone ever replaced the cover with a Yukon cover that has no emblem? Wondering if it's a straight deal with no issues to do the swap.

View attachment 189212 View attachment 189213

I have seen those bowties in all kinds of colors, maybe there is a black one? (or paint it black?)