spindles

[Omar]

thanks alex and tony

i need spindles only
i already have 3/2 eibach kit
the front is lowered with keys

tony.. u r not answering my main concern
are spindles going to improve handling?
and how much do u sell spindles only?

 

[NORCAL SS]

keys are the issue which makes ride worse. If your going for 3 inches the djm lower a arms with djm will corner better/ride better and will align. If you add spindles to what yo have now you will lose some turning radius ride will stay about the same but you will need upper camber bushings for alignment.

for 3 inches of drop i never use keys and spindles just go str8 to control arms.

Right now you will need spindles and you will need camber bushings which is about 360 dollars shipped. If you are on stock shocks I would get new shocks also which is another 130 for the belltech street performance shocks.

 

[Omar]

if i buy spindles im going back to stock key

 

[NORCAL SS]

if you had the keys set at 2 inches on stock shocks the shocks are prob done by now anyway.

Spindles with stock keys will ride much better but I would also do the belltech street performance shocks as well

Spindles belltech
shocks belltech
$400 shipped

Shoot me a pm if you have anymore questions im around 24/7

 

[Omar]

thank you tony

soon i will have the funds to get spindles and shocks
i will pm you

in the back do u think i need to get the rear hardware kit?
i have eibach 3" drop
with beltech shock extender
is djm rear kit going to work with the beltech extender?

 

[NORCAL SS]

thank you tony

soon i will have the funds to get spindles and shocks
i will pm you

in the back do u think i need to get the rear hardware kit?
i have eibach 3" drop
with beltech shock extender
is djm rear kit going to work with the beltech extender?

first of all the eibach isnt a full 3 inch drop thats why i stopped sellling them.

Do me a favor measure your truck from ground to fenderlip all around and shoot me back the measurements. are the eibach rear springs and shock extenders on the truck right now?

 

[Omar]

yes they are
i like the drop.. dont want to go any lower for now
im just thinking do i need the rear kit?
and is going to work (fit) with my beltech extender?

 

[NORCAL SS]

no need for rear djm hardware kit. I usually do the shorter endlinks at 4 inches and more than 4 inches the complete rear kit.

 

[Omar]

then i will get spindles only

thank you