Spohn Panhard Bar, no brackets??

[MeanGreen03]

Thanks Alex! I don't even have that wire bracket looking thing on mine. The bracket I was referring to was the little metal one that clamps the hose and attaches to the differential cover. After rereading your original post I realized you got rid of it for the hose clamps. I have the DJM links in the back so mine is set up a little different then yours. Thanks for getting some new pics! I think I'll try out the hose clamp method.

 

[denalianyone]

zip ties worked perfect for mines..no hanging cables

 

[Alex33]

zip ties worked perfect for mines..no hanging cables

I know a lot of guys use them when they add this part but I was hoping to find a better looking solution. I'm sure I'll revisit this next year when I have some more funds. I would really like to get a bracket that clamps on the panhard and the cable similar to this:

http://www.homedepot.com/h_d1/N-5yc...splay?langId=-1&storeId=10051&catalogId=10053

but that may be something I'll have to have made.

 

[Tahoewhat]

I know a lot of guys use them when the add this part but I was hoping to find a better looking solution. I'm sure I'll revisit this next year when I have some more funds. I would really like to get a bracket that clamps on the panhard and the cable similar to this:

http://www.homedepot.com/h_d1/N-5yc...splay?langId=-1&storeId=10051&catalogId=10053

but that may be something I'll have to have made.

Now i like that bracket, holds both of them. Clamp on and looks decent. Might have to check out lowes sometime.

 

[Alex33]

Now i like that bracket, holds both of them. Clamp on and looks decent. Might have to check out lowes sometime.

Yeah buddy!! That would be soo perfect! I just can't find anyone that makes the size I want. Most places have them in matching sizes. I haven't seen one that's large enough for the bar and small enough for the cable.

 

[Tahoewhat]

Yeah buddy!! That would be soo perfect! I just can't find anyone that makes the size I want. Most places have them in matching sizes. I haven't seen one that's large enough for the bar and small enough for the cable.

Question i have is what dept. would that even be in? I guess ,what would you use a smaller hole, & a larger one for? I have a friend in construction of houses, so he might have something, but id have to give him a example of for what use?

On a side note, going to finally try to put that brkt on this weekend.

 

[Alex33]

I have seen them at places that sell stainless braided hose for fuel lines, etc. There's a bracket that is the same as that figure 8 one that has a screw in the middle to hold everything together that I've used for fuel lines. That's where I got the idea. If any of your construction buddies can find something, lmk where so I can get a couple too.

 

[Tahoewhat]

I have seen them at places that sell stainless braided hose for fuel lines, etc. There's a bracket that is the same as that figure 8 one that has a screw in the middle to hold everything together that I've used for fuel lines. That's where I got the idea. If any of your construction buddies can find something, lmk where so I can get a couple too.

ok, will do.

 

[vjr021]

Did you have any issues with alignment after installing the bar??? I have mine, but haven't installed it yet.

Anything special about the install I should look out for?

 

[Tahoewhat]

Nope, all it does is align the rear end from left to right. And nothing special that i can remember about installing it. Just take out old one, put in new one.