Spohn Performance 450.00

[dropmech]

I would think $100 shipped for a used bar is acceptable seeing as how a brand new one is $135 shipped from Tony.

 

[digitalfiend]

I would think $100 shipped for a used bar is acceptable seeing as how a brand new one is $135 shipped from Tony.

I concur with you. Though, to be fair, $100 wasn't my initial offer. Sometimes offering low and then expecting the seller to counter slightly higher can backfire by upsetting the seller. Heck, I'm selling parts right now from my last ride and I got offered $300 on a $2000 component...it did irk me just a little bit, so I can understand to a degree.

Anyways...I'm hoping the mod accepts our combined wonder powers because this would be one less thing on my long list of mods to get done.

 

[Yukon-ya]

I'm glad you understand, it just leaves a bad taste in your mouth and then with the s&h can very from place to place so it just irks, like you said lol

---------- Post added at 12:09 PM ---------- Previous post was at 12:08 PM ----------

Ok the bars lol pm me your zip so I can find out about s&h

---------- Post added at 12:13 PM ---------- Previous post was at 12:09 PM ----------

And btw, the panhard bar doesn't have a "key" I only got one because I only needed one but I'm sure if you already have spohn uppers and lowers you might have a key and I ordered mine in BLK not red, just FYI

 

[dropmech]

What key are you talking about?

 

[digitalfiend]

What key are you talking about?

Do you have an adjustment key for your spohn panhard?

If you don't have a key, how did you tune it when you installed it?

 

[dropmech]

I think I have a newer version? Mine is adjusted with a wrench after loosening two jam nuts. Just crawl under and adjust it. I take a ruler to measure the wheel after adjustment.

 

[digitalfiend]

And btw, the panhard bar doesn't have a "key" I only got one because I only needed one but I'm sure if you already have spohn uppers and lowers you might have a key and I ordered mine in BLK not red, just FYI

Is the key that you're referring to required to adjust both control arms and the panhard bar?

 

[Yukon-ya]

Go to this page http://www.spohn.net/shop/2000-2006...Tahoe-Yukon-Avalanche-Escalade-Hummer-H2.html

And it's * Del-Sphere Adjustment Tool:

I only got one

 

[digitalfiend]

Go to this page http://www.spohn.net/shop/2000-2006...Tahoe-Yukon-Avalanche-Escalade-Hummer-H2.html

And it's * Del-Sphere Adjustment Tool:

I only got one

Now I see what you're talking about, thank you for slowing the bus down for me. One of us needs that tool...and my opinion is that it should be included with the control arms. If dropmech doesn't want it then I'd be happy to take it off your hands. Depending upon who gets it, would it be included with the prices that we've been discussing?

And by the way, are we doing this deal or what!?

 

[dropmech]

It's gonna be a while before I install these arms, so I can pick up the tool on my own later on if you want it.