Spray paint inner door handle bezels?

[blizz]

Mine are so faded they're almost white. I also need to do the inside door handle part too. Not the actual handle but the inside piece. I'd have to tape/mask and paint it while it's on the door. I'm not going through the hassle of drilling out rivets to take it off. Have any of opyou ever done this?

 

[southboundchicken]

I used some duplicolor vinyl/fabric spray paint i picked up at the local auto parts store and had great results it doesnt look at all like i sprayed it

 

[2000tahoeZ71]

The inside piece only comes as a complete unit, if I understand what you are talking about. The rivet thing really isn't a big deal. I drill them out, then put a u-clip on the metal over the hole where the rivet is, and them put a panhead sheet metal screw through it to hold it in.

 

[bowtiefreak]

I've had the whole handle off before. It's a pain in the ass getting linkages on there. Doable though.

 

[mastertony]

Nice!

I've had the whole handle off before. It's a pain in the ass getting linkages on there. Doable though.

They look great!

 

[bowtiefreak]

thanks. A little sanding then rattle can. Simple. Hardest part is getting the switches out