Starting

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Steve Davis

TYF Newbie
Joined
May 10, 2017
Posts
12
Reaction score
1
Location
Houston, TX
Hi everyone, not trying to hijack this thread, but I have the same issue on my 2009 Tahoe. I verified the starter relay is working and the 40 amp fuse is good and I get voltage there when the key is turned to start, but no voltage at the starter solenoid. I suspect a broken wire, but where could it be broken, is it worth the effort to find the break, or is it just easier to run a new wire?
 

jz57

Full Access Member
Joined
Apr 24, 2012
Posts
214
Reaction score
87
Run a makeshift wire first to verify the problem being from the wire/power supply or the starter.



Hi everyone, not trying to hijack this thread, but I have the same issue on my 2009 Tahoe. I verified the starter relay is working and the 40 amp fuse is good and I get voltage there when the key is turned to start, but no voltage at the starter solenoid. I suspect a broken wire, but where could it be broken, is it worth the effort to find the break, or is it just easier to run a new wire?
 

Meccanoble

Full Access Member
Joined
Oct 3, 2016
Posts
1,166
Reaction score
355
Location
Georgia
I'm thinking battery or wiring to battery. Weird an additional drain makes that much of a difference. When these things happen, does a jump help? That would answer a lot.
 

Forum statistics

Threads
132,997
Posts
1,878,128
Members
97,935
Latest member
b18cls1
Top