Tahoe_Rx
Member
- Joined
- Oct 15, 2020
- Posts
- 49
- Reaction score
- 74
Installed a Steelcraft brush guard today. Haven’t seen anyone else post about them so thought I would share .
Overall was pretty easy, but it did take me around 5 hours. Would be much faster if you have a second person. My install was also slower because I had to remove a rough country bull bar first.
Installing the brackets does require you to remove the front bumper which for me meant disconnecting 4 rigid cubes, a light bar and the parking sensors. Installing could be faster if you don’t have so many electronics in the bumper
Overall was pretty easy, but it did take me around 5 hours. Would be much faster if you have a second person. My install was also slower because I had to remove a rough country bull bar first.
Installing the brackets does require you to remove the front bumper which for me meant disconnecting 4 rigid cubes, a light bar and the parking sensors. Installing could be faster if you don’t have so many electronics in the bumper
