Steering wheel swap

[Tron843]

Hey I have an 06 Yukon Denali and wondering if I could swap in a newer (08-09) escalade steering wheel and use same year denali airbag with minimal headache or is it even possible at all

 

[BatsTDK]

Going to make an assumption here and say no. Even if they physically bolted on, it’s very likely the airbag wouldn’t wire up properly, and you’d lose your steering wheel buttons and probably horn too.

 

[adventurenali92]

I believe the spline on the shaft is completely different where it mounts to the steering column for the gmt900 steering wheels. I don’t think it will even bolt up to your 2006’s steering column.

 

[S33k3r]

Keep in mind there was a change in computer protocols in 2007, if I remember this right, so electronics from GMT900 generally don't work with GMT800.

 

[Momoney]

Going to make an assumption here and say no. Even if they physically bolted on, it’s very likely the airbag wouldn’t wire up properly, and you’d lose your steering wheel buttons and probably horn too.

Hi
I have a 2008 Yukon xl. I wanted to swap the steering wheel it with a 2013 heated Escalade. Thoughts ?

 

[BatsTDK]

Hi
I have a 2008 Yukon xl. I wanted to swap the steering wheel it with a 2013 heated Escalade. Thoughts ?

This is the wrong section of the forum. This section is for 2000-2006 models.

 

[Jwedge]

Hey I have an 06 Yukon Denali and wondering if I could swap in a newer (08-09) escalade steering wheel and use same year denali airbag with minimal headache or is it even possible at all

03-06 use the same harness and clock spring.