sub and amp help

[ccapehartusarmyINF.(ret)]

i currently have two infinity 1260w 4ohm svc subs running on the sub channel of my 5 channel amp and i want get a 3rd infinity sub wich creates an issue
3 subs wired in parallel brings the impedence to 1.3 ohms and i figured im going to have to buy another sub amp thats 1 ohm stable so other then orion hcca what other manufacturers out there currently make 1 ohm stable amps

 

[GeneralNoobzor]

http://www.sonicelectronix.com/cat_f47-242_i23_mono-subwoofer-amps.html

All 1 ohm stable amps, on the left you can select 1 ohm stable. Add all the RMS together and that is the wattage your amp should be. 1 ohm stable ofcourse.

---------- Post added at 11:00 AM ---------- Previous post was at 10:55 AM ----------

My recommendations:
http://www.sonicelectronix.com/item_63976_Pioneer-GM-D8601.html

http://www.ebay.com/itm/Pioneer-GM-...5177156?pt=Car_Amplifiers&hash=item54011180c4

Kenwoods go into protection mode fairly easily, MTX amps are easy to burn up.

Pioneer is the only one I truly trust there for what you need. You need 900w RMS 1ohm stable.

Goodluck, have fun, keep your hearing.

 

[RynoHarris]

I like Crunch amplifiers. They are affordable and put out good power. Check out amazon and search the crunch 3050.1, or even the 2000.1. Great amplifiers 1 ohm stable. I run the 3050 on 4 twelves at 1 ohm with no problems and have used the 2000 watt as well. The same company also makes hifonics which puts out better power than crunch but not quite as affordable. I paid 130 for my 3000 watt amp.

Sent from my HTC One X

---------- Post added at 12:49 PM ---------- Previous post was at 12:47 PM ----------

Crunch P1-3050.1 Car Amplifier by Crunch http://www.amazon.com/dp/B00716353U/ref=cm_sw_r_udp_awd_BIpKsb1ETY71A

Sent from my HTC One X

 

[ccapehartusarmyINF.(ret)]

well the sub channel on my 5 channel PA amp was pushing 420x1 at 2 ohms to my two infinitys i opted for pushing more power to just the two infinitys the amps adverstised at 700watts rms x1 and 1500 peaks but i figure its more like 550 to 600rms but shit idont care if they over rated my two twelves really hit hard to the point i have to turn the bass down bass boost off gain down significantly cuz its causing two much of that plastic shit in the backof my tahoe to rattle to much

 

[NathanJax]

There are plenty of companies that make 1ohm amps (most being Class D amplifiers)

JL Audio
Kenwood
Kicker
Etc.

Just remember, you get what you pay for. I have one 12" woofer on a Digital Designs M3B amp pushing around 3,500 to 4,000 watts to it

http://www.ddaudio.com/products/mobile-audio/amplifiers/mono-block-amplifiers/m3b

 

[anthonyz71]

Yup class d

 

[NathanJax]

Yup class d

what do you know about audio?

 

[anthonyz71]

LOL that a joke right . I was at nspl world finals and was at db drag world finals were I set records.

 

[NathanJax]

LOL that a joke right.

Yup

 

[ccapehartusarmyINF.(ret)]

im lookin at planet audios big bang amps 2500 watts from what ive heard ther better built then the anarchy amps
also is the jl audio jx 1000/1d 1ohm stable i was considering that one its not adv as 1ohm stable but everyone claims it works